Commodity Introduction This is a type of laser cut SMT stencil. It's 520mm x 420mm with aluminum frame. It's fabricated per IPC 7525A using supplied Gerber data. It's packed with KK carton (hard card) and usually 2 stencils are pac -ked for shipment.
Found printed Circuit Board laser PCB stencil with Stencil foil and Aluminum framed used for CPS
Commodity Introduction
This is a type of laser cut SMT stencil. It's 520mm x 420mm with aluminum frame. It's fabricated
per IPC 7525A using supplied Gerber data. It's packed with KK carton (hard card) and usually 2
stencils are packed for shipment.
Specifications
| Stencil dimension: | 520mm x 420mm x 20mm |
| Structure: | Stencil foils, Aluminum framed |
| Base material: | Stainless steel shim |
| Foil Thickness: | 0.05mm, 0.06mm, 0.08mm, 0.1mm, 0.12mm, 0.15mm, 0.18mm, 0.2mm |
| Aperture configured: | Laser cut |
| Appearance: | Engraving and electro polishing |
| Fiducial mark: | Open holes |
| Service area: | Worldwide |
| Quantity of open pads: | 1556 |
| Advantages: | a) High precision dimension; b) Good shape on the window; c) Hole wall is smoother. |
| Application: | CSP, BGA, 0.5mm QFP etc. package |
Learn and Buy PCB
Frequently used Unit Conversion in PCB industry
1 inch= 25.4mm
1 inch= 1000mil
1 foot = 12 inch=0.3048 meter
1mm = 39.37mil
1mm = 1000µm
1µm = 39.37 micro inch
1oz = 35µm = 1.4mil = 305g/m²
1inch² = 0.0645dm² = 6.4516cm² = 645.16mm²
1ft² = 144 inch² = 0.09290304m² = 9.29dm²
1m² = 1549.9969 inch²
Hot Tags: Electronic PCB Assembly Stencil Material Stainless Steel
Add a review
Your email address will not be published. Required fields are marked *