FPC Ragid-flex For Tracking GPS Device
Commodity Introduction
This is a type of flexible PCB for the application of Tracking Device. It's a 2 layer FPC at 0.15mm thick in a panel form. The base laminate is from ITEQ, It's fabricated per IPC 6012 Class 2 using supplied Gerber data.
Parameter & Data Sheet
| Size of Flexible PCB | 41.5X 112.3mm |
| Number of Layers | 2 |
| Board Type | Flexible PCB |
| Board Thickness | 0.15mm |
| Board Material | Polyimide (PI) 25µm |
| Board Material Supplier | ITEQ |
| Tg Value of Board Material | 60ºC |
| PTH Cu thickness | ≥20 µm |
| Inner Iayer Cu thicknes | N/A |
| Surface Cu thickness | 70um |
| Coverlay Colour | Yellow |
| Number of Coverlay | 2 |
| Thickness of Coverlay | 25 µm |
| Stiffener Material | Polyimide |
| Stiffener Thickness | 0.2mm |
| Type of Silkscreen Ink | IJR-4000 MW300 |
| Supplier of Silkscreen | TAIYO |
| Color of Silkscreen | White |
| Number of Silkscreen | 1 |
| Peeling test of Coverlay | No peelable |
| Legend Adhesion | 3M 90ºC No peeling after Min. 3 times test |
| Surface Finish | Immersion Gold |
| Thickness of Nickle/Gold | Au: 0.03µm(Min.); Ni 2-4µm |
| RoHS Required | Yes |
| Famability | 94-V0 |
| Thermal Shock Test | Pass, -25ºC±125ºC, 1000 cycles. |
| Thermal Stress | Pass, 300±5ºC,10 seconds, 3 cycles. No delamination, no blistering. |
| Function | 100% Pass electrical test |
| Workmanship | Compliance with IPC-A-600H & IPC-6013C Class 2 |
Products show:
Welcome to our cooperation!
Hot Tags: fpc ragid-flex for tracking gps device, China, factory, manufacturers, suppliers, quotation, made in China
Add a review
Your email address will not be published. Required fields are marked *